[InigoMontoya]

I used Shark Blue OE paint from Porsche and it was very good, but I can see that some colors work better than others. Also make sure to Shake very well.

 

[InigoMontoya]

Meant to ask: How did you apply it? Usually with the brush, you flood the spot.

Thin coats. first put a thin coat and let it dry about 30 minutes, then put 2nd coat. I used the brush but rubbed off most of the paint on the side of the paint dispenser.
On the 2nd or 3rd coat you can add a little more to hide the edges of the chip.

 

[InigoMontoya]

Sorry. Feeling my way around the site. The above question was meant for InigoMontoya

Have a microfiber ready with some alcohol in case you screw up, just wipe it off quickly and you can try again. Even though it's not paint thinner, if you wipe it off right, then do a 2nd pass with alcohol, it seems to work for me.