Porsche 718 Forum banner
1 - 15 of 15 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter · #1 ·
My Blendmount will arrive on two days. Question is do you just clamp the Blendmount on the rear mirror post or did you put tape or a thin rubber piece on the mirror post and then clamp?
Thanks for any comments!
 

·
Registered
Joined
·
23 Posts
Because there isn’t really a forward and very little upward adjustment, so you need to adjust vertically to max and slide collar forward towards mirror as much as you can. This results in about 20mm below bottom of mirror and about 10mm behind mirror bottom for face of radar detector.
 

·
Registered
2022 Cayman 2.0
Joined
·
829 Posts
Everyone, can you help me with which mirror tap to select, I’m connecting a Redline 360c (not sure that matters, I think the mirror tap model is more about the mirror?), and the options are:

MTX 1015
MT 1015

Thanks
 

·
Registered
Joined
·
405 Posts
Everyone, can you help me with which mirror tap to select, I’m connecting a Redline 360c (not sure that matters, I think the mirror tap model is more about the mirror?), and the options are:

MTX 1015
MT 1015

Thanks
Blendmount’s website doesn’t even list the MTX as an option for the Redline 360c. Only the MT-1015 or the HT-1096.
 
1 - 15 of 15 Posts
Top