[KJIsaacson]

I have a problem with the "Limits" setting in the instrument cluster. (Vehicle|Limits). Right now, I have a second limit that's set at 75 mph. I can't deactivate that setting or change it to another speed.

If I uncheck the box for that setting, it will recognize the change for the rest of my drive, but if I turn the car off for more than a few minutes, upon starting the car again, it reverts to an active 75 mph alert.

If I change the speed for that alert, same result: Change is recognized for the rest of my drive, but next trip, back to an active 75 mph alert.

Suggestions?

Thanks.
Ken

 

[MikePhDPE]

if you have the memory functions you have to store it before you turn off the car. This happens to me 3 times every time i change a setting before i remember to store it.

 

[KJIsaacson]

if you have the memory functions you have to store it before you turn off the car. This happens to me 3 times every time i change a setting before i remember to store it.

Mike, how would I determine if I have the "memory functions," and if I do, how do I store it?

Thanks!

 

[Graustark]

Mike, how would I determine if I have the "memory functions," and if I do, how do I store it?

Thanks!

From the electric seat package that includes memory of seating positions.

 

[MikePhDPE]

how would I determine if I have the "memory functions,"

on the door you'll see the buttons for storing settings/seat positions/mirror positions to users 1 & 2