Porsche 718 Forum banner
1 - 5 of 5 Posts

· Premium Member
Joined
·
1,891 Posts
There is not.

It's likely possible via an ECU setting change -- what in auto-speak is generically called 'coding'. However, the coding community for Porsches is virtually nonexistent for reasons I've not totally been able to determine. Porsche's version of VAG (as used by other VW cars) appears to be proprietary and unaccessible via relatively simple COM interfaces, much less software that requires a PC to run. The extent of VAG data and settings on Porsches accessible through the OBD-II port appears to be limited to electronics diagnosis and fault code reading.
 
  • Like
Reactions: Nickmo718

· Registered
Joined
·
39 Posts
We are a Porsche Independent with Piwis III, this is not something that's 'codeable' with the diagnostic.

Might be possible with non-standard tools, but for a small market like Porsche it's unlikely anyone will produce anything to make these types of changes.


There is not.

It's likely possible via an ECU setting change -- what in auto-speak is generically called 'coding'. However, the coding community for Porsches is virtually nonexistent for reasons I've not totally been able to determine. Porsche's version of VAG (as used by other VW cars) appears to be proprietary and unaccessible via relatively simple COM interfaces, much less software that requires a PC to run. The extent of VAG data and settings on Porsches accessible through the OBD-II port appears to be limited to electronics diagnosis and fault code reading.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top