Porsche 718 Forum banner

Signal Booster Option Code 9ZE - How to Register

5109 Views 4 Replies 4 Participants Last post by  Barryng
My new Boxster has Option code 9ZE, "Smartphone Compartment". Assuming I understand it correctly, it includes a active bi-directional RF signal amplifier with an outside antenna to provide an amplified signal in the smartphone compartment. This is in contrast to other cars that simply use passive antennas to accomplish the same thing but not as effectively.

A few days ago I received a card from Porsche stating "BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider ...". (The caps are Porsche's) The card included the pertinent data that AT&T (in my case) will ask for.

Yesterday, I spent over 90 frustrating minutes on the phone with AT&T reps all over the world and no one had a clue what to do. They all spoke fluent English but not one could communicate fluently in English. One rep said she could help but I had to bring the signal booster into my house. Clarifying that it is an integral part of a 3,100 Lb car did not appear to influence her perceived need to bring it inside my house. Another rep transferred to me to someone within Porsche but she was also clueless and insisted I had to go to an AT&T brick and mortar store to register it. As expected, the store personnel had a deer in the headlights look when I explained what I needed. However, the store manager gave me a phone number and suggested I call it. So, I just called 866-595-1334 and at was cheerfully answered "AT&T Connected Car". I reached a tech rep in Western Europe that was obviously born with an intact well functioning brain. He immediately understood what I needed but he also immediately understood he did not how know to do it. After a short hold he stated "no one here has a clue so I will need to call you back". He took my number and called back in less than 30 minutes with a solution.

Go to Goolge and search for "at&t register signal booster".
The first and top hit is:"AT&T signal booster registration".
That takes you to:[FONT=&quot] https://securec45.securewebsession.com/attsignalbooster.com/

[FONT=&quot]Fill out the form and your apparently done. I say apparently because now I have to figure out how to verify it really works.

[FONT=&quot]I was amazed that registering the signal booster was such an arcane and mysterious task considering how many prior to me probably had to do the same thing. I hope this helps someone(s) in the future avoid the wasted time, frustration, and just plain annoyance, of dealing with AT&Ts off shore support teams.[/FONT]
See less See more
1 - 2 of 5 Posts
I just assumed it had to be registered based on previous experience with a type of signal booster in my home AT&T calls a Micro-Cell. This device actually is more than a signal booster as it creates a mini cell site in ones home but uses an internet connection to communicate with the cellular network in lieu of an external antenna. Since I had to register this device I erroneously assumed the true signal booster in the car had to be registered. I guess at my age if I have not yet learned not to assume I never will.
1 - 2 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.